Study on flow and resistance characteristics of denitration installation using selective catalytic reduction method

Huadian Technology ›› 2009, Vol. 31 ›› Issue (12): 8-11.

• 专题综述 • Previous Articles Next Articles

Study on flow and resistance characteristics of denitration installation using selective catalytic reduction method

LüTongbo1, LI Lin2,WANG Shurong1, WANG Zhiqiang2

1.China Huadian Engineering Corporation Limited, Beijing 100035, China; 2.Energy and Power Engineering School of Shandong University, Jinan 250061, China

Received:1900-01-01 Revised:1900-01-01 Published:2009-12-25

Abstract

Abstract: The flow in SCR method denitration installation of a 300MW unit was simulated numerically by using of CFD software Fluent, and the influence of the guiding devices, the ammonia injection grid and the flue gas deflection angle of reactor on the system resistance characteristics was analyzed. The research result shows that the guiding devices and rectifier devices can greatly improve the flow in the installation, and the guiding plates can optimize the flow and reduce the resistance. In the ammonia injection grid, the influence of the wear plate on reactor system resistance is smaller, and proper change of the flue gas deflection angle can reduce the resistance loss.

Key words: selective catalytic reduction (SCR) method, flow characteristics, resistance characteristics, guiding plate, numerical simulation

LüTongbo;LI Lin;WANG Shurong;WANG Zhiqiang. Study on flow and resistance characteristics of denitration installation using selective catalytic reduction method[J]. Huadian Technology, 2009, 31(12): 8-11.

[1]	TONG Jialin, ZHANG Yan, LIU Wensheng, MAO Jianbo, YE Xuemin. Numerical simulation on co-combustion and alkali metal distribution in an opposed firing boiler mixed with sludge [J]. Integrated Intelligent Energy, 2024, 46(8): 50-58.
[2]	SONG Jianjun, FU Kun, CHEN Meiqian. Simulation on the gas-solid flows and combustion in a multi-pass circulating fluidized bed based on computational particle fluid dynamics method [J]. Integrated Intelligent Energy, 2024, 46(8): 59-66.
[3]	ZHANG Lidong, LI Pei, JIANG Tieliu, LI Qinwei, ZHANG Lei, XU Feng, MENG Xin. Numerical simulation on the wind blocking and speed increasing effect of trough solar arrays [J]. Integrated Intelligent Energy, 2024, 46(6): 1-7.
[4]	SHANG Yongqiang, WANG Wenfeng, WANG Weishu, GUO Jiawei, ZHENG Haonan, GE Xuewen. Analysis on the thermal insulation of long-distance steam heating pipes [J]. Integrated Intelligent Energy, 2023, 45(4): 47-51.
[5]	YUAN Tianzhi, CHEN Ruiwen, Dilari YASHENG, XU Luoyun, HU Sideng. Research of parameter selection and accuracy optimization on event-driven simulation method of DC-DC converters [J]. Integrated Intelligent Energy, 2023, 45(3): 41-49.
[6]	GUO Guangzheng, GOU Yujun, ZHONG Xiaohui. Simulation study on the effect of flow channel's different cross-section on PV/T system performance [J]. Integrated Intelligent Energy, 2022, 44(4): 76-84.
[7]	WANG Ding, XIAO Hu, CHEN Yuxuan, YUE Song, ZHANG Yanping. Preheating analysis on molten salt storage tank based on CFD method [J]. Huadian Technology, 2021, 43(7): 75-81.
[8]	ZHAO Dazhou, WANG Mingxiang, RUAN Huifeng, GU Jing, WANG Mingxiao. Simulation and optimization for Urea-SCR system of the natural gas internal combustion engine in a distributed energy station [J]. Huadian Technology, 2021, 43(5): 45-52.
[9]	CHEN Bing, GUO Yongheng, LI Hongjiao, LIU Baiqian, ZHANG Ganyang, ZHAO Haibao. Configuration of electrode and plate in ESP and numerical simulation of particle migration in the electric field [J]. Huadian Technology, 2020, 42(9): 1-8.
[10]	BAI Hao, ZHANG Jian, GUO Xinwei, LIU Yicheng, MA Qianhui, ZHANG Zhongxiao. Numerical simulation for synergistic control on denitration in the pulverized coal boiler with air staging and flue gas circulation [J]. Huadian Technology, 2020, 42(9): 9-15.
[11]	LIN Yu. Numerical simulation of spraying effects and impacts on the desulphurization tower shell with two types of nozzles [J]. Huadian Technology, 2020, 42(9): 16-25.
[12]	DING Yang，HAO Jiangang，XIE Daxing. Numerical analysis on 9E gas turbine DLN1.0 combustion system [J]. Huadian Technology, 2020, 42(5): 31-36.
[13]	ZHANG Fufeng1，LIU Daokuan2，QU Baozhong2，YU Ziyan1，WU Kai2，MA Shuangchen2. Status and progress of numerical simulation in flue gas evaporation technology for desulfurization wastewater #br# [J]. Huadian Technology, 2020, 42(3): 8-18.
[14]	YANG Zhen, WANG Xinyu, ZHU Xuan'er, HUANG Yaji, YUE Junfeng. Numerical simulation study on reducing high temperature corrosion in furnace by adjusting internal and external secondary air and taking closing-to-wall air [J]. Huadian Technology, 2020, 42(12): 28-36.
[15]	ZHAO Yang, CHEN Bing´an, WANG Pengxiang, LI Xianda, SUN Rui, SUN Shaozeng. Numerical study of the emission from co-combustion of large-proportion semi-coke and pulverized coal [J]. Huadian Technology, 2020, 42(10): 64-72.

Study on flow and resistance characteristics of denitration installation using selective catalytic reduction method

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments