华电技术 ›› 2012, Vol. 34 ›› Issue (7): 68-71.

• 新能源 • 上一篇    下一篇

碟式斯特林太阳能热发电系统结构仿真研究

厉剑梁1,兰维2,吕渤林2   

  1. 1.中国华电集团公司,北京100031;2.华电电力科学研究院,浙江杭州310030
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2012-07-25 发布日期:2012-07-25

Simulation and study on structure of dish stirling solar thermal power generating system

LI Jianliang1, LAN Wei2,L Bolin2   

  1. 1.China Huadian Corporation, Beijing 100031, China; 2.China Huadian Electric Research Institute, Hangzhou 310030, China
  • Received:1900-01-01 Revised:1900-01-01 Online:2012-07-25 Published:2012-07-25

摘要: 在介绍碟式斯特林太阳能热发电系统研究进展、动态及应用前景的基础上,对碟式斯特林太阳能热发电系统进行了设计和分析。针对碟式斯特林太阳能热发电系统的整个结构,建立了典型工作状态下碟式太阳能热发电系统支撑桁架的有限元分析模型,通过分析确定了最危险的工作状态。根据分析结果,对桁架的结构提出了优化建议。

关键词: 碟式太阳能热发电系统, 斯特林发电装置, 结构, 仿真, 载荷

Abstract: The study progress,the tendency and the application prospect of the dish stirling solar thermal power generation system were introduced. Based on this, the dish stirling solar thermal power generation system was designed and analyzed. Aiming at the whole structure of the dish stirling solar thermal power generation system, the finite element analysis model of supporting girder of the dish solar thermal power generation system under typical operation condition was established; based on analysis, the most danger working condition was determined. According to the analysis results, a suggestion of girder structure optimization was put forward.

Key words: dish type solar thermal power generating system, stirling power generation device, structure, simulation, load